BLACK HOT RAIL BRIDGE HUMBUCKER

BLACK HOT RAIL BRIDGE HUMBUCKER

[PICKUPHB11BRIDGE] £19.88
Out of stock

This is a bridge position twin coil dual hot rail humbucker pickup with 4 wires.

The pickup has two hot rail pole pieces each with its own coil.

The pickup is fully shielded for low noise and wired for hum cancelling.

Total coil resistance is 13.5kOhm and impedance is 5Henry.

The cavity in the guitar body would need to be cut to at least 86x39mm.
The two humbucker fixing screws are 78mm apart.

The coils are are brought out to a 4 core screened cable,
4 cores and a cable screen are available for wiring.

For standard configuration the black wire (attached to the screen) is
the common or ground and the green wire is the live which connects to the volume pot.

The red and white wires are soldered together and connect the two humbuckers in series.

If required you can separate the white and red wires and use the two humbuckers in series,
parallel or reverse configuration for more complicated coil tap wiring arrangements.

The pickup dimensions are shown below.