6 ACOUSTIC GUITAR BRIDGE PINS CREAM

6 ACOUSTIC GUITAR BRIDGE PINS CREAM

[AGBRIDGEPINSCRM] £3.99
Quantity:

A set of six top quality hard plastic acoustic guitar bridge pins.
Each bridge pin has a slot along its length to take the guitar string.

The base of the pin shaft is 3.8mm across. The diameter near top is 4.9mm.
Each bridge pin is 30mm long.
These bridge pins should fit a typical acoustic guitar bridge, you should be aware that some bridges use
non-standard size bridge pins,
so it is worthwhile measuring your existing bridge pins to check that these will fit.


Bridge pins are used to hold the end of the guitar string firmly against the bridge plate.
When restringing a guitar the ball end of the string should sit firmly against the bridge plate.
To fit a new acoustic guitar string, place the ball (or nut) end of the string in the bridge pin hole,
place the bridge pin in the hole
and pull the string up until the ball is seated against the bridge plate. Then push the pin tightly down.
This will ensure the string doesn`t slip as it is tightened.